Waiting for the monthly bill only to be surprised by the amount is a common experience in Islamabad and Rawalpindi. An IESCO bill calculator helps you avoid that by turning your meter reading into an estimated bill before IESCO sends it. Whether you use an online tool or work it out on paper, the method is the same: count your units, apply the right tariff, and add fixed charges, adjustments and taxes.
This guide walks you through each step with the current NEPRA tariff that IESCO publishes, so you can check any IESCO bill calculator result yourself and spot mistakes before you pay. You will learn how slab rates, protected and unprotected status, and the new load-based fixed charges change your bill. It also covers FPA, QTA, FC surcharge and GST, with worked examples for single phase, three phase and TOU connections.
What Is an IESCO Bill Calculator?
An IESCO bill calculator is any tool or method that estimates your electricity bill from the units you use. Online versions do the arithmetic for you, but they all follow the same formula you can apply by hand.
What It Can and Cannot Tell You
A good IESCO online bill calculator gives a close estimate of your energy charges and fixed charges. It cannot give your exact official bill, because some items change every month or depend on your account, such as fuel price adjustment, arrears and certain taxes. Treat any result as a guide, and use your actual IESCO bill as the final amount. You can check your real bill any time with our IESCO bill checker.
Information You Need Before You Start
- Present and previous meter readings (or the units from your last bill)
- Sanctioned load in kW, printed on your bill
- Tariff category, for example residential A-1
- Whether you are a protected or unprotected consumer
- For TOU meters, your peak and off-peak units and the MDI reading
Step 1: Calculate Your Units
Units, measured in kilowatt-hours (kWh), are the starting point of every IESCO unit calculator and every IESCO calculator you will find online.
Units = Present Reading − Previous Reading
Read your meter today and subtract the previous reading printed on your last bill.
Example: present reading 18,450 − previous reading 18,200 = 250 units.
For a whole-month estimate, take the reading on about the same date as IESCO’s reading. If you read early in the month, you can scale up. For example, 120 units in 12 days is about 10 units a day, or roughly 300 units for a 30-day month.
Units Are Not the Same as Your Bill
Units tell you how much electricity you used. Your payable bill is units multiplied by the rate, plus fixed charges, adjustments and taxes. Two homes using the same 250 units can pay different amounts if their sanctioned load or consumer category is different. Our guide on how to read an IESCO bill shows where each charge appears.
Step 2: Apply the Correct Slab Rate
Residential rates are set by NEPRA and notified by the government. IESCO publishes them on its tariff guide.
IESCO Slab Rates 2026
IESCO’s tariff guide, based on S.R.O. No. 279(I)/2026 of February 2026, lists these A-1 residential rates for a sanctioned load below 5 kW. These are base rates before adjustments and taxes, and they are the figures any IESCO bill calculator 2026 estimate should use:
| Category | Units | Fixed charges (Rs per kW per month) | Rate (Rs per unit) |
|---|---|---|---|
| Lifeline | Up to 50 | – | 3.95 |
| 1–100 | – | 7.74 | |
| Protected | 1–100 | 200 | 10.54 |
| 101–200 | 300 | 13.01 | |
| Unprotected | 1–100 | 275 | 22.44 |
| 101–200 | 300 | 28.91 | |
| 201–300 | 350 | 33.10 | |
| 301–400 | 400 | 36.46 | |
| 401–500 | 500 | 38.95 | |
| 501–600 | 675 | 40.22 | |
| 601–700 | 675 | 41.85 | |
| Above 700 | 675 | 47.20 |
Rates change when a new tariff is notified, so check the latest figures on our IESCO tariff guide before relying on an estimate.
Protected vs Unprotected Consumers
Protected consumers are domestic users whose use stays within the 200-unit range set by the government. In 2026, the government has said subsidies for protected consumers will continue through a QR-code registration system, so eligible households should register using the QR code on their bill. The category changes how the slab rate is applied:
- Protected: IESCO’s tariff page says only protected residential consumers get the benefit of one previous slab. For 150 units, the first 100 units are charged at Rs. 10.54 and the next 50 at Rs. 13.01.
- Unprotected: there is no previous-slab benefit. All units are charged at the rate of the slab you fall in. For 250 units, all 250 are charged at Rs. 33.10.
- Lifeline: the tariff page says lifeline consumers get no slab benefit.
This is why crossing into a higher slab, for example from 300 to 301 units, can raise an unprotected bill sharply.
Step 3: Add Fixed Charges
Since February 2026, fixed charges for domestic consumers depend on sanctioned load rather than being a flat amount per connection.
How the Fixed Charges Calculator Works
For normal (non-TOU) domestic connections, IESCO’s tariff guide says fixed charges are based on sanctioned load. The formula is:
Fixed charges = rate for your slab (Rs per kW) × sanctioned load (kW)
Example: an unprotected home using 250 units (201–300 slab, Rs. 350 per kW) with a 2 kW sanctioned load pays 350 × 2 = Rs. 700 in fixed charges. Lifeline consumers have no fixed charge in the table. An IESCO fixed charges calculator simply applies this formula.
Minimum Charges
IESCO’s tariff page also lists minimum monthly charges for residential connections, even if no energy is used: Rs. 75 per month for single phase and Rs. 150 per month for three phase connections. The page’s wording suggests these minimums apply where no monthly fixed charges are billed, so they matter mostly for lifeline, empty or very low-use connections.
Step 4: Add Adjustments, Surcharges and Taxes
These items are the main reason a simple units × rate estimate is lower than the real bill.
FPA and QTA
- FPA (Fuel Price Adjustment): a per-unit charge or credit decided by NEPRA each month to reflect the actual fuel cost of generating electricity. It can raise or lower your bill.
- QTA (Quarterly Tariff Adjustment): a per-unit adjustment decided for a quarter to recover or return differences in the power companies’ approved costs.
Both are applied as Rs per unit, so multiply the rate shown on your bill by your units.
FC Surcharge
The FC (financing cost) surcharge is a per-unit charge used to repay power sector debt. Its rate is set by the government and appears as a separate line on your bill. Our guide on what FC surcharge means in an IESCO bill explains it in detail.
GST and Other Taxes
- GST: an 18% general sales tax is charged on electricity bills, according to the FBR’s briefing to the National Assembly finance committee in June 2026.
- Withholding tax: the FBR said withholding tax applies when the monthly bill exceeds Rs. 100,000. Most homes will not reach this.
- Removed charges: the PTV fee of Rs. 35 and the electricity duty were removed from bills in 2025, so do not add them to a 2026 estimate.
- Late payment surcharge: added only if you pay after the due date.
Worked Examples: Estimating Your 2026 Bill
These examples use IESCO’s February 2026 base rates. They show energy and fixed charges plus 18% GST on those two items. Real bills also include FPA, QTA, FC surcharge and GST on those, so your actual bill will differ.
Example 1: Unprotected Home, 250 Units, 2 kW Load
| Item | Calculation | Amount (Rs) |
|---|---|---|
| Energy charges | 250 × 33.10 | 8,275 |
| Fixed charges | 350 × 2 kW | 700 |
| Subtotal | 8,975 | |
| GST 18% | 8,975 × 0.18 | 1,616 |
| Estimate before FPA, QTA and FC surcharge | 10,591 |
Example 2: Protected Home, 150 Units, 1 kW Load
| Item | Calculation | Amount (Rs) |
|---|---|---|
| First 100 units | 100 × 10.54 | 1,054 |
| Next 50 units | 50 × 13.01 | 651 |
| Fixed charges | 300 × 1 kW | 300 |
| Subtotal | 2,005 | |
| GST 18% | 2,005 × 0.18 | 361 |
| Estimate before adjustments | 2,366 |
Three Phase and TOU Connections
For an IESCO bill calculator 3 phase estimate, the phase itself does not change the residential slab rates. What changes is usually the sanctioned load:
- Three phase below 5 kW: use the slab table above. Fixed charges are higher because the per-kW rate is multiplied by a larger load. For example, 4 kW in the 201–300 slab gives 350 × 4 = Rs. 1,400.
- 5 kW and above (TOU): IESCO’s tariff lists Rs. 46.85 per peak unit and Rs. 34.53 per off-peak unit. Fixed charges are Rs. 675 per kW, based on 50% of sanctioned load or the MDI, whichever is higher.
TOU example: 6 kW sanctioned load, MDI of 4 kW, 100 peak units and 400 off-peak units:
- Peak: 100 × 46.85 = Rs. 4,685
- Off-peak: 400 × 34.53 = Rs. 13,812
- Fixed: the higher of 3 kW (50% of 6) and 4 kW (MDI) is 4 kW, so 4 × 675 = Rs. 2,700
- Subtotal Rs. 21,197, plus 18% GST of Rs. 3,815, gives about Rs. 25,012 before adjustments
Why Your Estimate Differs From the Actual IESCO Bill
Even a careful IESCO bill calculator result rarely matches the bill to the rupee. Here is why, and how to close the gap.
Common Reasons for the Difference
- Reading dates: your reading and IESCO’s reading were taken on different days.
- Monthly adjustments: FPA, QTA and FC surcharge are added on the actual bill.
- Slab or category: crossing into a higher slab, or losing protected status, changes the rate for all units.
- Sanctioned load: a different load than you assumed changes fixed charges.
- Arrears or credits: unpaid amounts, installments or corrections from earlier months.
- New tariff: NEPRA has notified new rates since you last checked.
If the difference is large and you think the reading is wrong, see our IESCO complaint guide to request a correction.
Frequently Asked Questions
How do I calculate my IESCO electricity bill?
Subtract the previous reading from the present reading to get units. Apply your slab rate, add fixed charges (rate × sanctioned load), then add FPA, QTA, FC surcharge and 18% GST.
What is the IESCO per unit rate in 2026?
IESCO’s February 2026 tariff lists Rs. 10.54–13.01 for protected consumers and Rs. 22.44–47.20 for unprotected consumers, depending on the slab, before adjustments and taxes.
How are IESCO fixed charges calculated?
For normal domestic connections, the fixed charge is your slab’s rate (Rs. 200–675 per kW) multiplied by your sanctioned load in kW. Lifeline consumers pay no fixed charge.
How is a three phase IESCO bill calculated?
Below 5 kW, it uses the same slab rates, with fixed charges on the higher load. At 5 kW and above, TOU peak and off-peak rates and Rs. 675 per kW fixed charges apply.
What taxes are added to an IESCO bill?
The main tax is 18% GST. Withholding tax applies when the monthly bill exceeds Rs. 100,000. The PTV fee and electricity duty were removed in 2025.
Conclusion
Any IESCO bill calculator follows the same four steps: work out your units from meter readings, apply the correct slab rate for your category, add fixed charges based on sanctioned load, then add FPA, QTA, FC surcharge and 18% GST. Use IESCO’s current tariff, keep in mind that monthly adjustments change, and compare your estimate with the actual bill. If the gap is large, check your reading and request a correction if needed. Repeat the calculation each month to keep your bill under control.



